2011年9月17日 · It would have to be heated up, to take the length of flooring out...Then clean up the joint, re-glue and re-fit. It doesn't soften enough to be re-usable as a glue (just becomes rubbery). Try and avoid filling the floor, always cracks eventually. If the glue trick doesn't work...re-laying is the best bet. Hope this helps

2022年11月24日 · For PVA glues (so called white wood glue) you want a glue that has high tack, quick dry characteristics. These are not necessarily characteristics of regular carpenter’s wood glues even though they are popular with many modelers. A high tack, quick dry PVA glue can be found in arts and crafts stores or from Amazon.

2024年10月22日 · The kits were sold complete with glue, the Nitrocellulose type. It was easily homemade by dissolving celluloid plastic in acetone. The landlord that owned the house that they rented effectively closed the business because of the proximity of an open flame water to the volatile acetone!

2024年10月22日 · Uncurred PVA glue is easily removed with water. Once it cures; ie, the chemical reaction is complete, it is either water resistant or waterproof depending on the formulation. For example Titebond II is water resistant, Titebond III is supposedly waterproof so is rated for outdoor applications Titebond II is rated for indoor applications.

2021年7月10日 · ALL PVA glue will eventually separate, if you wait long enough. Key rule is; the smaller the solid particles you are using the longer they stay suspended in the liquid. That's because, the smaller the particle, the less it weighs and the less effect gravity has on it and the longer it stays suspended.

2012年5月6日 · A wall that has been previously painted will not need pva.fill any holes and rub down wall before painting. I would slightly water down first coat to help adhere to wall and help with a smooth flow off your brush and roller better smooth finish.. then let it dry over night if possible room temperature not blazing hot with heating on..then apply a another need coat of …

2013年5月7日 · Isopropyl (rubbing) alcohol will dissolve and remove "cured" Weldbond every time. This is the only PVA glue I use on my wood models for this one reason. It is something Bob Hunt taught his students and has stayed with me ever since.

2023年12月26日 · I used an oil-based stain to stain some parts before gluing. The instructions encouraged staining before assembly. I emailed the PVA glue manufacturer (Gorilla) to clarify if the stain would affect the glue joints. They responded with an assurance it should be fine. The joints in question were those fixing the bulkheads/frames to the false keel.

2019年2月27日 · PVA is reversible with heat, which an be an advantage in assembly as well. With a tricky fit, let PVA glue dry on both sides and work into place with a soldering iron to melt the glue and hold in place for a few seconds.

2024年12月28日 · PU glues expand as they cure and will fill any gaps in your joint with a soft, brittle, frothy foam. Gorilla does make a PVA wood glue, however. Epoxy is exceptionally strong, but is messy and a pain to mix up. It has its uses though, especially in laminating thin pieces, because it won't cause the wood to swell and warp like a high-moisture ...