2016年4月23日 · there is no manual I am aware of for setting the pressure - it is factory set so the vinyl is pinched securely and moves without slippage. now even a properly adjusted plotter can slip if made to pull the vinyl off of the roll (especially 50 yard rolls) - I personally have had many plotters and the pressure on the rollers has never been a ...

2017年1月16日 · adjusting the rollers will only cause tracking problems among other things. I have never had the marks not go away after the vinyl is installed - if you want a less agressive mark look at a higher end machine as the knurles tend to be less deep - they will still be there though with all machines unless you get a tractor fed like the gerber.

2018年1月1日 · on force we have seen mainboard changes in the MH cutters where the same cut is made with 80 for force and the later boards were like 140 to make the same cut - and force can also be affected by what blade you are using as a chines blade will take 40 percent more force to make the same cut as a cleancut brand blade . . .

2023年2月4日 · Hello, I have the SC2 model and the Sure cuts a lot 6 version for my PC and version 4 for my Mac (dont ask). Neither computer will detect the cutter at all. I have been back and forth with Sure cuts a lot support and nothing they have suggested has worked. I have searched for a driver download fo...

2020年6月24日 · I have a new SC2 28 and a windows 7 laptop. I have been messing around with the Vinyl Master Cut program for a couple of weeks now (designing stuff and all). Last night I hooked up the cutter but the vinyl spooler says it cant detect the device. The COM3 in port name is greyed out and says not co...

2024年8月12日 · Vinyl Cutter support and discussion. ... Discuss MH Series Vinyl Cutters and get community assistance for any related issues.

2020年3月5日 · When I send a job to the cutter, the cutter will leave tiny gaps between shapes and letters that result in me having to cut/tear the vinyl manually. Additionally, the cutter blade seems to be lifting thin cut shapes out of the vinyl that end up scattered on my designs and blade. This never happened before. I've researched this issue thoroughly.

2006年11月30日 · US Cutter Refine Plotter Quick Install Instructions Signcut and most other vinyl / tint cutting software interfaces with the vinyl cutter directly without installing Windows drivers. The exception is if you choose to use the USB cable in which case you will need to install the USBSerial conversio...

2017年12月17日 · On the Vinyl Spooler window, click the Connection tab. There will be an option to add the cutter by clicking the ADD button. Select your model cutter from the list and click Install. Once the cutter has been installed, select the correct Port Type under Connection Method. For the SC series cutter you would set the port type to Direct COM port.

2018年8月24日 · There's another old thread about this (discussing the max. thickness a cutter should handle) and the answer was .3mm --- 12/1000 of an inch sheet of regular printer paper, 20 pound stuff, is a little over 3/1000, so you can cut material that would be equal to about 4 sheets of that thickness of regular paper.